Controlled Power & Lighting Inc. is an electrical contractor serving Sebastian, FL with electrical repairs, panel upgrades, circuit breaker repair, lighting and fixture installs, surge protection, car charger ports, and new construction wiring. This page is for homeowners, property owners, and businesses who need electrical work done or want a problem looked at. To get started, call or send a request describing what you are seeing and where.

Maybe a breaker keeps tripping, a room has lights that flicker when the AC kicks on, or an outlet feels warm. Maybe you are adding an EV charger, a new appliance, or a standby generator and suspect the panel cannot handle it. Those are the moments when an electrical contractor earns the call, and the sooner the symptoms are described, the easier it is to point the work in the right direction.


What We Handle

An electrical contractor covers the full range of work behind your walls, in your panel, and on your fixtures. For Sebastian customers, we focus on these jobs:

  • Electrical repairs and troubleshooting: dead outlets, flickering lights, buzzing switches, and circuits that cut out for no obvious reason.
  • Panel upgrades and panel modifications: replacing an outdated panel, increasing service capacity, or making room for new equipment.
  • Circuit breaker repair: breakers that trip repeatedly, will not reset, or feel hot.
  • Dedicated circuits: a separate line for an appliance, workshop tool, or other heavy load.
  • Lighting and fixture installs: ceiling fixtures, recessed lighting, outdoor lighting, and swapping out old fixtures.
  • Surge protection: protection for the panel and the electronics and appliances it feeds.
  • Car charger ports: wiring and installation for EV charging equipment.
  • Standby generator electrical work: the electrical side of a generator installation.
  • New construction electrical work: wiring planned and installed for new builds.

Residential Work

For homes, most calls start with a single symptom and grow into a bigger conversation once the panel or wiring is checked. A simple fixture swap may be all you need, or the visit may show that a circuit is overloaded and needs its own line.

Commercial Work

We also take on commercial electrical service, including larger projects. If you manage a business space, describe the scope, the equipment involved, and any schedule constraints when you reach out.


Signs You Need an Electrician

Electrical problems rarely appear without warning. Watch for these patterns:

  • Breakers that trip more than occasionally, or one that will not stay reset
  • Lights that dim when large appliances start
  • Outlets or switch plates that feel warm, look discolored, or crackle
  • A burning or hot plastic smell near an outlet or panel
  • Two-prong outlets, or too few outlets so extension cords run everywhere
  • A panel that is rusted, noisy, or crowded with no open slots
  • Electronics or appliances that fail after storms

A burning smell, scorch marks, or a hot panel deserves quick attention. Turn off what you safely can and call before using that circuit again.


Repair, Upgrade, or New Work

People often use one phrase for three different jobs, so it helps to separate them.

  1. Repair: fixing something that stopped working, such as a failed breaker, a dead outlet, or a bad switch. The goal is to restore the existing circuit.
  2. Upgrade: changing the system so it can carry more or work better, such as a larger panel, a dedicated circuit, or surge protection.
  3. New installation: adding something that was not there, like a charger port, new lighting layout, or wiring for new construction.

This page covers all three as part of electrical contracting. Jobs outside that scope, such as appliance repair itself, are a separate service, so ask us if you are unsure where your project falls.


Sebastian Conditions to Plan For

Sebastian sits on the Treasure Coast, where summers are hot, humid, and stormy. Most homes here run air conditioning for much of the year, which puts steady load on panels and circuits. Frequent thunderstorms mean power surges are a realistic concern, and moisture and salt air can wear on outdoor fixtures, exterior outlets, and equipment over time.

The area also has a mix of older homes and newer construction, and many properties have added equipment over the years, such as pool pumps, workshops, or garage circuits. Older panels may not have room for those additions. We serve Sebastian and nearby communities including Vero Beach, Fellsmere, Wabasso, Micco, Grant-Valkaria, Indian River Shores, Melbourne Beach, and Palm Bay.


How a Job Goes

Every project differs, but most follow this general path:

  1. Request: you describe the symptoms or the project by phone or through a request.
  2. Evaluation: the electrician looks at the panel, the affected circuits, and the equipment involved.
  3. Scope and quote: the work is explained, and you receive the details of what is included.
  4. Installation or repair: the work is completed, with power shut off to the affected circuits as needed.
  5. Testing and walkthrough: circuits are tested and the results are explained to you.

Signs of Good Work

Whoever you hire, here is how to judge the result:

  • Clear labeling: a panel directory should match what each breaker controls.
  • Clean, secure wiring: cables should be supported and routed neatly, not left loose or crowded.
  • Right-sized parts: breakers and wire should match the load, not just whatever was on the truck.
  • Testing before leaving: you should see outlets, lights, or equipment working.
  • Tidy site: covers back on, debris removed, and an explanation of anything you should watch.

Questions to Ask First

Before you hire any electrical contractor in the Sebastian area, ask:

  1. Are you licensed for this work in Florida? Ask for the license information so you can verify it yourself.
  2. Do you carry insurance? Request proof before work begins.
  3. Will permits and inspections be handled? Panel changes, generators, and new circuits often require them.
  4. What exactly is included? Ask about parts, wiring, patching, and cleanup.
  5. How will scheduling and updates work? You should know when someone arrives and how changes are communicated.

What Affects Cost

Electrical pricing depends on the job, which is why a number without a look at the project is a guess. The main factors are:

  • The type of work: a fixture swap, a new circuit, and a panel replacement are very different jobs
  • Condition and age of the existing wiring and panel
  • Distance from the panel to the new load, and how hard the route is to reach
  • Equipment size, such as charger amperage or generator capacity
  • Permits, inspections, and any code updates the work triggers
  • Number of fixtures, outlets, or circuits involved

A clear written quote should spell out the scope, the materials, any extras, and how changes are handled if the electrician finds something unexpected once walls or panels are opened.


Common Questions

How Do I Start an Electrical Project with a Contractor in Sebastian, FL?

Call or send a request describing the symptoms or the equipment you want added. Include what room or area is affected and how long it has been happening.

How Long Will the Work Take?

It depends on the scope. A fixture install is a much smaller job than a panel upgrade or new construction wiring, and permits or inspections can affect scheduling. Your quote should explain the expected sequence.

How Often Should My Electrical System Be Checked?

There is no single schedule for every home. A look makes sense when you buy a property, add major equipment, notice warning signs, or live with an older panel and wiring.

How Is the Price Worked Out?

Pricing follows the scope of work, the materials, the condition of what is already installed, and any permit needs. A written quote should list each of these so you can compare it fairly.

Can Several Jobs Be Handled Together?

Often yes. Combining fixtures, a dedicated circuit, and surge protection into one plan can make sense, and you can ask for each item to be listed separately in the quote.

Can You Install a Car Charger or Connect a Standby Generator?

Yes, we handle car charger ports and the electrical work for standby generators. The panel capacity and the distance to the equipment will shape what is needed, so describe your setup when you contact us.

Have an Electrical Project? Let’s Talk.

Tell us what you need, from a flickering light to a full panel upgrade, and we’ll get back to you with a clear next step.